【AGPtek】M28 Firmware Upgrade

 M28

【AGPtek】M28 Firmware Upgrade

  1. Allows to go to the previous song / next song by long pressing the PRE/NEXT button for 2 seconds when the screen is off.
  2. Allows to pause/play the music by long pressing the ENTER button for 2 seconds when the screen is off.
  3. Allows to adjust the volume by click the volume button(+/-) when the screen is off.
  4. Delete “Play Mode” under “Settings”.
  5. Modified string order under “Settings” as Language, Date and time, Display settings, FM background, Sound settings, Power saving mode, Sleep timer, Information, Format device, Factory Settings.
  6. Allows to rechoose language when selecting “Factory Default”.

Download >>

How to reset the player?

Reset the player under the following circumstances:

  1. Can not turn on the player(before reset, connect to a computer and make sure the player has electricity)
  2. Can not be recognized by the computer (for the first use or has been used for some time)
  3. Wrong button function, player crashed because of subjective factors

How to reset different player?

  1. For players WITH power slider: A02 A26 A12 B03 M23 M07 G05 G05W G05S G15S U1
    Switch the slider to ON position, then hold the play button for 10 seconds;
  2. E02 G12:
    Hold the play button for 10 seconds;
  3. For players WITHOUT power slider: M28 M29 S05 S12 S18 A125 A20 A50 A01 U3 A11 ROCKER
    Hold the power button for 10 seconds;
  4. For players with a reset hole: M20 R2 R2S IMP B05 G02 C05 S11
    Push a pin into the reset hole and press when you feel the pressure;
  5. Modified the string when entering now playing interface and there is no music playing in the backend, the player says “No music playing” instead of “File not found”;
  6. H01
    Switch the slider to ON position, then wait for 10 seconds.

【AGPtek】R2S Firmware Upgrade

 R2S

【AGPtek】R2S Firmware Upgrade

  1. When there is no card inserted in the player, the display will say “Please insert SD card” when entering the music playing/Recording/E-book/folder interface;
  2. Modified the bug when listening to FM radio, the player will stay in the FM interface instead of searching and re-entering the language selection interface if the memory card is inserted;
  3. Modified the bug when fast forward/rewind, the player will start playing from the point when user stops fast forward/rewind;
  4. Deleted unnecessary information. When removing the memory card, the player will only say “Memory card removed”;
  5. Modified the string when entering now playing interface and there is no music playing in the backend, the player says “No music playing” instead of “File not found”;
  6. Modified UI: shuffle / normal playback; repeat (one, all, off, view playing).

Download >>

How to use a glass bottle cutter at home?

What you got is a glass bottle when you finish drinking your Bloody Mary Mix. Then what will you do to the bottle? Just throw it away? Actually, with a good bottle cutter, you can make it a drinking glass, a flower vase, a candle holder, or even a wind chimes.

AGPtek Bottle Cutter is especially designed for home users. It is easy to install and use. Install the cutter according to the user manual firstly. Then follow the four steps below and you will get what you want.

The four easy steps are: etch, heat, cool and polish.

.

STEP 1: ETCHING A LINE ON THE BOTTLE

This is exactly the same as making a score line when cutting glass. Lay the bottle cutter on the top of your flat table. Place the bottle on the cutter.
Hold the cutter steady with your left hand. Grasp the bottle with your right hand. Turn it against the glass cutter edge in a slow and steady movement. Make sure you complete 1 full rotation, but do not do any more than that. Later you will get a clear cutting line on the bottle.

1

 

 

STEP 2: HEATING THE CUTTING LINE

Immerse the cutting line with water that is a little hot and rotate the bottle at a fast speed so as to give a uniform temperature to the glass. Holding the bottle, you should feet it hot in touch but not too hot to handle. Continue reading

AGPtEK CD Player with 3.5mm Audio Jack FM Radio Remote USB port Internal Bluetooth Receiver ( it also can play CDs with MP3 Files burned onto them )White

Designed with LED display screen, powered by mains adapter, you can listen music through Bluetooth MP3 player or your phone under its BT mode. Small and portable, the player provides shocking bass experiment for you!

BWCDW-1

  • Designed with Bluetooth function and built-in speaker, use the remote the change it to Bluetooth mode and the CD player stream music through Bluetooth MP3 player or your phone
  • Shocking bass experiment for its loudspeaker which is designed for high closed full band speaker
  • Designed with Auto power on / off timer, please note that each time you turn back on the player you need to reset the time and the power on / off timer

Product introduction

Brand AGPtEK
Color White
Weight 870g
Dimension 177 x 155 x 30 cm

Package included

  • 1 X CD player
  • 1 X AC Adapter
  • 1 X Remote
  • 1 Set of Expansion Bolts
  • 1 X User’s Manual (Warranty certificate)
  • 1 X Wall Bracket Plate

For more information on:
http://www.agptek.com/AGPTEK-SKP1-750-131-1.html


Or shop on Amazon via:
http://www.amazon.co.uk/dp/B018Z4O6YI