lucesita124 wrote:this works for tp12A?
Not Sure if it will work with the TP12A
your best bet is to follow my post instructions and run the Detection Test to see if it is compatible with this ROM.. if its compatible it will tell you. if not it will tell you. and you don't actually flash the device with the detection test, it only determines if your tablet is compatible or not with the available JB rom.
If it IS compatible you can proceed to the next two steps in the tool and prepare an SD card to flash your device. BUT ONLY do this IF your tablet is in the list of compatible devices. Also if you find that your tablet is compatible with this ROM you will need to make sure you have the wmt_scriptcmd file sitting on the desktop with the ROM folder and FWC folder as I described in my previous post (I found the wmt_scriptcmd file in the download for the TP12A that was posted in another thread on this forum.
I Can NOT Stress this enough.. IF YOUR TABLET IS NOT COMPATIBLE, DO NOT PROCEED WITH STEPS 2 AND 3 IN THE TOOL OR YOU WILL BRICK YOUR TABLET!
The direct link for the file download for the wmt_scriptcmd file is here, all you need to extract from the zip file is the wmt_scriptcmd file the rest can be ignored and trashed.http://www.agptek.com/download/TP12A_Vi ... _V3000.zip
if your tablet is in the compatible list, follow the 3 step process in the Tool, and when your done you have an SD card with the new JB 4.1 ROM ready to plug into your tablet and flash the ROM on the device. the Flashing process was pretty fast, mine was up and running in under 10 minutes.
Now with that.. If Anyone wants to know if this will work with their specific model, I suggest you download the files I mentioned and run a detection test for yourself. It will not harm your device to run the test, and again if it isn't the Tool WILL Tell YOU, so you don't have to worry about bricking your tablet with a ROM that isn't compatible.