Smoke Machine

  • Perfect for Halloween, Christmas, wedding, parties, DJ performance, stage show & creative shoots.
  • The output power reaches to around 2000 CFM (c.f./min) between 2 and 3 meters distance.
  • 500W smoke machine with Wireless Remote & Automatic Spray. The machine requires preheating and operates in a cyclic “heat-up-spray” mode.

Master Your Scene: Dynamic Lighting & Fog

  • Shop now HA0196R

    Preheating for 2-3 minutes

    Spray for about 20 seconds

    ≈2000 CFM at 2-3m distance

    Fog control (auto mode/wireless remote)

    8 RGB LED lights

    1 color light effect

    /

    Fixed handle

  • Shop now HA0278

    Preheating for 3-4 minutes

    Spray for about 25 seconds

    ≈2000 CFM at 2-3m distance

    Fog control (auto mode/wireless remote)

    8 RGB LED lights

    13 color light effects

    4 dynamic lighting modes

    Fixed handle and Adjustable 3-in-1 handle

  • Shop now HA0304

    Preheating for 3-5 minutes

    Spray for 30-40 seconds

    ≈2000 CFM at 2-3m distance

    Fog control (auto mode/wireless remote)

    3 RGB LED lights

    13 color light effects

    4 dynamic lighting modes

    Fixed handle

  • Shop now HA0344

    Preheating for 3-5 minutes

    Spray for 40-60 seconds

    ≈2000 CFM at 2-3m distance

    Fog control (auto mode/wireless remote)

    /

    /

    /

    Adjustable 3-in-1 handle

easy-to-use

Universal Fog Function Operation Steps

  • Pour Fog Fluid

    You must pour water-based fog fluid into the water tank. (The use of oil-based fluid may clog the machine).

  • Power On & Preheat

    Turn on the machine and wait for the preheating cycle to complete (2-5 mins, model dependent, until the green light is on).

  • Activate Spray Mode

    Press the “AUTO SPRAY” or “AUTO FOG” button after preheating to start the automatic spray and reheat cycle.

  • Control via Remote

    Use the provided wireless or wired remote control to start and stop the fog output from a distance.

ideal for seasonal events (Halloween/Christmas), celebrations (weddings/parties), performances (DJ/live stage), and media production (creative shoots).

Unleash Creativity:
Fog & Light Control

The series offers dynamic light effects, including RGB and multi-color displays with adjustable modes (e.g., fade, flash). Some models allow fog and lighting systems to operate independently for more creative flexibility.

High-Power Fog Output with Easy, Automated Operation

All four models are designed to generate dense, non-toxic fog with a powerful output of ~2000 CFM (cubic feet per minute) and feature automatic spray functions operated via remote control after a brief preheating period.

We’ve also included a set of usage instructions and FAQs for your convenience.

Feel free to explore

Safety Operating Instructions

Do not leave the machine unattended. Always turn off the power when not in use. Do not place the machine near flammable or explosive materials or within children’s reach. During operation, the surface becomes hot, the smoke outlet emits 80°C air within 10 cm, and the smoke nozzle reaches a high temperature of 260°C.

If the machine is left powered on and heating without being used, and you notice smoke coming from the casing or a burning smell, do not panic. Immediately turn off the power and contact store customer service to request a replacement 260-degree thermal cutoff switch. The machine can only resume normal operation after the switch is replaced.

Troubleshooting

  1. The machine heats up normally, and the water pump makes a buzzing sound indicating it’s pumping, but only air comes out without smoke.

    Solution: Note that the fog machines do not include fluid. Add dedicated smoke fluid or the correct liquid compatible with the machine. Only water-based fog juice can be used.

  2. You notice smoke coming from the entire unit when using a new machine.

    Solution: Due to rough handling during transportation, the smoke outlet may have been blocked. Simply adjust the position of the smoke tube with a common tool to restore normal function.

  3. The smoke nozzle of the new machine is crooked.

    Solution: The smoke outlet is designed to be adjustable within a 10-degree range. Use a tool to adjust the smoke angle as needed.

  4. The new machine stops producing smoke after 30 minutes of use.

    Solution: This may occur if the liquid has run out. This product is a constant-temperature smoke machine with continuous smoke output. If it runs out of fluid, refill the liquid within 5 minutes.

  5. The machine shuts down after prolonged use.

    Solution: The machine is equipped with a high-temperature thermal protection cutoff switch. After cooling down for 10 minutes, it will automatically restart.

  6. After some time of use, the machine produces less and less smoke.

    Solution: Due to high-temperature operation, mineral deposits may form and clog the pipes. To resolve, flush the system with a 50% clean water and 50% white vinegar mixture for 5 minutes continuously to remove impurities.

  7. The new machine heats up but does not work, produces no smoke, does not respond to the remote control, and there is no buzzing sound from the water pump.

    Solution: This is likely due to severe impact during transportation, which damaged the thermal cutoff switch for smoke production. The machine cannot be used in this condition. Contact store customer service to request a replacement 225-degree thermal cutoff switch.