AGPTEK 196 Feet 60m 1080P HD HDMI Network Extender Over Single Cat6/6A/7 Ethernet Cable with IR Blaster Extension, Supports 3D 1080P 20~60KHz, Deep Color
【1080P Transmission】– This HDMI extender supports 1080P HD, HD Audio, 3D; It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6 or higher level cables following standard IEEE-568B, For better performance, we suggest to use cable longer than 45ft/15m
【HDMI Lossless transmission】– It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection,Adjust the specification automatically for different cable lengths 1-60m to achieve the best display
【Pure Hardware Transmission】– It is pure hardware design,No driver needed, plug and play. Adopt full HD transmission technology to make the video image more vivid
【IR Remote Control】– Support 20~60KHz wide Frequency IR signal transmission for controlling the source device, IR Emitter Cable and IR Receiver Cable are included
【Installation Requirements】– Requires one single cat6/6A/7 cable to connect TX and RX side. Suitable for HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc); HDMI display device like SDTV, HDTV, sony/Epson/samsung projector with HDMI port; DON'T work for cable box; We stand by our products 100% with a 12-month warranty
Product description
UPC: 713382812481
Product description
Color:black
Description:
– The HDMI extender over a single UTP cables with IR control is the right way to send your HDMI signal over long distances.
– Instead of using expensive HDMI cables, this device lets you use your existing Cat5e/ 6 cables/sockets while also performing the same functions like transferring Deep Color video and new lossless compressed audio.
– And if that weren't enough, you can use your existing remote to control your device through an IR blaster.
Specification:
* HDMI signal: Compatible HDCP
* Resolution supported: 480i@60Hz, 480p@60Hz, 576i@50Hz, 576p@50Hz, 720p@50/60Hz, 1080i@50/60Hz, 1080p@50/60Hz
* Network cable: Low resistance and consumption oxygen-free copper core(CAT6, CAT6A, CAT7)
* Transmission length: CAT6:60m at 1080P
* IR remote control: Support 20~60KHz wide frequency IR remote control
* Working temperature: 0°C~60°C
* Power: DC5V/1A 2pcs
* Power consumption: TX:2W; RX<2W
* Product size: 2.82(W) x 2.62(D) x0.98(H)inch*2pcs
Installation Requirements:
1. HDMI source device(computer graphics card, DVD,PS3, HD monitoring equipment etc).
2. HDMI display device like SDTV, HDTV, projector with HDMI port.
3. UTP/STP cat6/6A/7 cable, follow standard IEEE-568B.
Note:
1.High quality cat6 or cat6e cable is needed to work with this hdmi extender
2.Only supports the PCM audio output
Package Contents:
1 x HDMI to RJ45 sender TX
1 x RJ45 to HDMI receiver RX
2 x DC5V/1A
1 x User manual
1 x IR blaster extension cable
1 x IR receiver extension cable
AGPtek - is a registered trademark protected by the US Trademark Law.AGPtek products are sold by authorized sellers only.
Note: If you connected and cant get any video. Please change to different resolution.
